MGM Switchview Models
The MGM Switchview™ lever requires a certain amount of clearance between the scope body and the nearest object for proper operation. If you have super low rings this may be an issue. We have included the clearance specification in the individual product listing.
Please measure carefully before ordering. The Switchview™ lever come standard in Flat Black. A silver model as shown in some of our pictures below is an extra cost option.
Call Mike Gibson Manufacturing @ 1-888-POPPER1 (1-888-767-7371) and order yours today!
Switchview™ Improvements
The MGM Switchview™ levers undergo continuous refinement as we receive input from shooters like you. The pictures are not always the most current version shipping, so if you have any concerns about the Switchview™ lever you are interested in, please don't hesitate to contact us.
Burris XTR 1-4x24, 1.5-6x40, 3-12x50, and 6-24x50
The MGM Switchview™ lever for the Burris XTR needs .260" of clearance between the scope body and the nearest object for proper operation. Fits all XTR scopes and Bushnell Banner wide angle 3-9. The factory says XTR and Burris Euro Diamond are the same ring, but this has not been confirmed yet. If you have a Euro Diamond, please call before ordering.
IOR Valdada Pitbull
The MGM Switchview™ lever for the IOR Valdada Pitbull needs .284" of clearance between the scope body and the nearest object for proper operation. Because this scope only has about 110 degrees of rotation, this should only affect scopes with very low mounts. Please note that red is an extra cost option.
IOR Valdada Tactical 1.5-8
The MGM Switchview™ lever for the IOR Valdada Tactical 1.5-8 needs .174" of clearance between the scope body and the nearest object for proper operation.
Leupold CQT
The MGM Switchview™ lever for the Leupold CQT needs .265" of clearance between the scope body and the nearest object for proper operation.
Leupold VX-II
The MGM Switchview™ lever for the Leupold VX-II lever needs .253" of clearance between the scope body and the nearest object for proper operation.
Leupold VX-3 and Mark IV w/o Illuminated Reticle
The MGM Switchview™ lever for the Leupold VX-3 and Mark IV without Illuminated Reticle lever needs .225" of clearance between the scope body and the nearest object for proper operation.
Leupold Mark IV w/Illuminated Reticle
The MGM Switchview™ lever for the Leupold Mark IV w/Illuminated Reticle fits the 1.5x5, 2.5x8, 3x9, and 8.5x25 models. The lever needs .240" of clearance between the scope body and the nearest object for proper operation.
Millett DMS
The MGM Switchview™ lever for the Millett 1-4 (DMS-1) and 6-25x56 (LRS-1) needs .256" of clearance between the scope body and the nearest object for proper operation.
Mueller APV 4.5-14
The MGM Switchview™ lever for Leupold VX-3 will also fit the Mueller APV 4.5-14 x 40mm Adjustable Objective APV Reticle scope. It needs .225" of clearance between the scope body and the nearest object for proper operation.
NightForce NXS
The MGM Switchview™ lever for the NightForce NXS needs .256" of clearance between the scope body and the nearest object for proper operation.
Schmidt-Bender Short Dot
This Switchview™ lever is so new we have not had time to generate the clearance figure. Please contact us if you are unsure the Switchview™ lever will fit.
Trijicon Accupoint
This Switchview™ lever is so new we have not had time to generate the clearance figure. Please contact us if you are unsure the Switchview™ lever will fit your application.
